|
Process Runner might reflect incorrect SAP returned messages in the iBook or External Excel when running Transaction file. If such behavior is observed, then refer to this section of troubleshooting.
Background Information/Cause:
Incorrect SAP returned messages while running Transaction files are experienced due to improper transaction settings. This error usually occurs when 'TX Messages' option at iNETConnector is disabled at the required SAP System which is selected to login. Another reason for such consequence is lack of any one Authorization from the function group as mentioned in the table below.
Sr. No.
|
Function Group Authorization
|
Description
|
1
|
SDTX
|
If user has SDTX function group authorization, then Method 1 is selected in Standard TX Setting
|
2
|
SIGE
|
If user has SIGE function group authorization, then Method 2 is selected in Standard TX Setting
|
3
|
BATG
|
If user has BATG function group authorization, then Method 3 is selected in Standard TX Setting
|
Note: If User do not have any of this function group authorization, the TX Message option will be deactivated automatically.
Suggested Solution:
Following are the generic steps to enable 'TX Messages' option for selected SAP system at iNETConnector
1.Start Process Runner and open a transaction file in which such problem persists. 2.Go to iNETConnector. 3.Select the required SAP System and click on 'Properties' at 'Server/Group' tab of iNETConnector window. 4.At the 'Properties' window, go to 'Transaction Settings' tab. 5.Make sure that 'TX Messages' option at 'Standard TX Setting' is enabled.
|
Following steps can help you to check if required function group authorization is assigned to a user or not:
1.Logon to SAP using GUI into SAP system where authorization problem seems to occur. 2.Run Transaction code SE37 and type in AUTHORITY_CHECK_RFC, Click on single test (F8). 3.In USERID field, type in user name who has access problem or for whom you want to check the authorization 4.In FUNCTIONGROUP field, type RFC_NAME required (For e.g. SDTX, RFC1, BATG). 5.Click on execute (F8).
If this results in an exception then user does not have appropriate authorization. Security team will have to add appropriate authorization as per instruction provided.
|
If your issue is still not resolved, please contact support@innowera.com with screenshot of specific error message for further assistance.
Next:
Communication Error with License Server
|
